HarmonicTune 0.92 Crack [32|64bit] [Latest]







HarmonicTune 0.92 Crack + [Updated]

HarmonicTune Serial Key is an app for mobile phone based testing and tuning of chromatic instruments, especially music instruments.
When the tuning of the chromatic instrument is done, the instrument’s fundamental frequency can be displayed. You can also listen to the instrument via the built-in headphone jack.
You can use HarmonicTune Serial Key to test and see which key is assigned to which tuning note and play back (test) different music pieces by the same instrument that can be stored in the phone’s memory and later played.
HarmonicTune Features:
– Detailed and fast display of tuning errors (accuracy) and tuning notes (melody) of a particular instrument.
– Additional sound effects via the built-in headphone jack.
– The algorithm for the base frequency detection is not perfect and does not cover all the special cases of guitars, strings and basses.
– Fast calibration of the internal microphone.
– Fast and accurate brightness adjustment of the display.
– Output note books, and others instruments.
– Private use only.
HarmonicTune Requirements:
– Mobile phone with the application installed.
– Headphone cable.
– Good pair of headphones with an impedance of less than 200 Ohm.
– Adjustable volume control of the headphones, and the application.
– ADB Debugging and software development experience.
– Some experience with the programming language C++.
If you want to experience what HarmonicTune is like, you can use the following videos to play a “test tune” with HarmonicTune and a video of the application when it is loaded:

For information about use HarmonicTune’s features or to report a bug to HarmonicTune you can access the support page here:

The HarmonicTune application was designed to be an general purpose chromatic Instrument Tuner. You should be able to tune nearly every kind of instrument with it (including brass, strings, piano, guitars.).
Nevertheless the algorithm for the base frequency detection is not perfect, but I hope to improve it step by step over time. The application is written in C++, uses the libraries “wxWidgets” and “portaudio”

HarmonicTune 0.92 Crack + Full Product Key

Includes an Instrument Tuning Dial with 30 adjustable full chromatic interval steps between A and G (including notes with sharped or flat sign), and 8 Additional fine tuning steps between +/-0.5 semitones for individual instruments. The base frequency detection method (used in the Field-Testing mode) is based on a fundamental mode of the applied musical signal (see detemination of the base frequency in the Detailed Information box below).
The Cracked HarmonicTune With Keygen-ID application (also called Detune Mode) tunes the Instrument in dependence on the characteristic of a specifically tuned Instrument, described by a single ASCII-coded number. Instead of using a traditional Tuner Dial, the Detune Mode shows a Spectrum of the processed Signals, which can be used to recognize the characteristic of an instrument.
“Detuning”-An instrument is detuned whenever the frequency of a selected fine-tuning step is higher than the frequency of the base frequency (from the Field-Testing mode).
“Detuning indicators”-The Detuning is displayed in the Scale-Dial in front of the Instrument with indication on the frequency of the selected fine-tuning step.
Detuning indicators are shown with filled colours for positive steps and semi-coloured lines for negative steps (see the Detuning Indicators box below).
Please note that the scale digits show the pitch of the selected detune step on top of each other, which makes it a little hard to read.
Detuning Indicators:
The colored dots in front of the Instrument (see the upper part of the Scale-Dial above) are used to display the detuning indication. Each dot covers the pitch of one nominal pitch step (cf. the detune steps listed in the Detune-Indicators box). Each dot is colored according to the value of the frequency of the detune step in semitones. Positive steps are displayed with filled dots, and negative steps with grey dots.
When playing, each player has his own characteristic of the audio signal (for example: Piccolo, Flute, Clarinet, Trumpet, Bassoon and others). HarmonicTune shows these characteristics in the Detune-Indicators box to the right in the main scale-dial. Below the scale-dial, the Detune Indicator itself shows the specific harmonic tone that is tuned for each characteristic. The colour of the dot at the centred dot itself represents the detune, but the pitch is shown in the tone-table above.
When there are no

HarmonicTune 0.92 Crack Free Download

– detect the base frequency of the instrument
– display the frequency
– adjust the frequency knob
– adjust or show the RMS level display
– press play to play
– holds the new frequency and plays for 30 seconds
HarmonicTune Changelog:
– [26/02/2013] – Version 0.0.26:
– – Updaded to version “wxWidgets-3.1.0-mingw-libc-compat.dmg”.
– – set the correct window style.
– – set the correct window size.
– – fixed the unclickable toolbar buttons when the screen size is small.
– – fixed the theme crash and other small problems.
– – fixed the package installation.
– – several bugfixing.
The version: 0.0.25:
– – added a tooltips for the frequency and RMS level.
– – added a small RMS level display (1.0-4.0).
– – fixed the Settings-Menu.
– – fixed the crash on the data upload.
– – improved the algorithm for the base frequency detection.
– – fixed some bugs.
The version: 0.0.24:
– – added a small RMS level display.
– – fixed some bugs.
The version: 0.0.23:
– – added the Load-Settings-Menu-Item, which saves the Settings-Menu settings for a restart.
– – fixed a bug in the symbol “HarmonicTune”.
– – fixed some bugs.
The version: 0.0.22:
– – added the “Use dialog” for switching the voice mode.
– – added a listener for program-reloading (by MIDI).
– – added an “RMS Load Display” to the Settings-Menu.
– – changed the Windows Menu icon.
The version: 0.0.21:
– – added a “Save Settings-Menu” menu item, which saves the Settings-Menu settings for a restart.
– – added an “Update”-Menu.
– – fixed a bug in the Settings-Menu.
– – fixed a bug in the settings dialogs.
– – fixed a bug in the volume control.
The version: 0.0.20:
– – added settings dialogs.
– – added a settings dialog, which allows you to

What’s New in the HarmonicTune?

An application that will show you two charts. One chart will show the frequency of the instrument. On the left a little window will show you frequencies and an arrow at them to indicate which frequencies will be good for tuning. The second chart will display the actual value read from the file that is selected by the user. This enables you to see what type of instrument you are tuning and will also show you if there is any kind of noise in the instrument.
The application will be optimized for both size and speed. It will show what instruments have been opened and close them, when they are being opened or closed and when they are closed all but the last window will be closed.
The code is on github and all the needed files can be downloaded to compile and run HarmonicTune.

HarmonicTune Changelog v1.3 (31 Oct 2013):
– Major rework on bar tuning calculation, now it uses the same code as the midi tuning calculator
– Added an option in the midi file as per this topic
– Added an option to display the current notes, this is set when the MIDI file is being loaded. By default it is set to display the current lowest and highest note on the file.
– Changed the MIDI file to no longer use some unnecessary internal messages.
– The tuning is now calculated and displayed only once per MIDI file, meaning the filter can now be set to show only one note at a time. In the past the filter would show the first note, the next note, etc..
– Improved midi file header code, added a binary type field.
– Improved code related to midi files, no longer use arrays of values to store all the data.
– Added a simple menu to speed up the midi file opening
– Some small changes in the gui
– Window for display of current time based on the MIDI file is now always on top, as well as the notes chart.
– Audio changes
– Audio file opened is now saved to the config file, and the audio files are reloaded if they are already saved there
– Current note when used to open audio files is now set at the beginning
– Audio file reads the filename in the config file when needed.
– Use midi queue for audio files
– Audio file now display the audio data in the file and not just the number of beats as was used in v1.2.
– GUI: changed the layout of buttons in the application so they


System Requirements For HarmonicTune:

EmuTOS is a product that is a 64-bit application, so we can assume it will be running on a 64-bit operating system. Even though the 64-bit version is the most common version of Windows 7, that isn’t required. If you are running Windows 8 or Windows 10 you should run the 32-bit version of EmuTOS.
EmuTOS is designed to run on PC’s that have a Windows OS installed, however, EmuTOS will run on Mac’s and Linux too.



شارك التدوينة

لا توجد أي تعليقات

اترك تعليقاً

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *